NekMesh.cpp File Reference

#include <string>
#include <boost/algorithm/string.hpp>
#include <boost/program_options.hpp>
#include "Module.h"

Include dependency graph for NekMesh.cpp:

Go to the source code of this file.

Functions
int	main (int argc, char *argv[])

Function Documentation

int main	(	int	argc,
		char *	argv[]
	)

Definition at line 48 of file NekMesh.cpp.

References Nektar::LibUtilities::NekFactory< tKey, tBase, >::CreateInstance(), Nektar::Utilities::eInputModule, Nektar::Utilities::eOutputModule, Nektar::Utilities::eProcessModule, Nektar::Utilities::GetModuleFactory(), and Nektar::LibUtilities::NekFactory< tKey, tBase, >::PrintAvailableClasses().

{
    po::options_description desc("Available options");
    desc.add_options()
        ("help,h",         "Produce this help message.")
        ("modules-list,l", "Print the list of available modules.")
        ("modules-opt,p",  po::value<string>(),
             "Print options for a module.")
        ("module,m",       po::value<vector<string> >(),
             "Specify modules which are to be used.")
        ("verbose,v",      "Enable verbose mode.");

    po::options_description hidden("Hidden options");
    hidden.add_options()
        ("input-file",   po::value<vector<string> >(), "Input filename");

    po::options_description cmdline_options;
    cmdline_options.add(hidden).add(desc);

    po::options_description visible("Allowed options");
    visible.add(desc);

    po::positional_options_description p;
    p.add("input-file", -1);

    po::variables_map vm;

    try
    {
        po::store(po::command_line_parser(argc, argv).
                  options(cmdline_options).positional(p).run(), vm);
        po::notify(vm);
    }
    catch (const std::exception& e)
    {
        cerr << e.what() << endl;
        cerr << desc;
        return 1;
    }

    // Print available modules.
    if (vm.count("modules-list"))
    {
        GetModuleFactory().PrintAvailableClasses(std::cerr);
        return 1;
    }

    if (vm.count("modules-opt"))
    {
        vector<string> tmp1;
        boost::split(tmp1, vm["modules-opt"].as<string>(), boost::is_any_of(":"));

        if (tmp1.size() != 2)
        {
            cerr << "ERROR: To specify a module, use one of in, out or proc "
                 << "together with the filename; for example in:vtk." << endl;
            return 1;
        }

        if (tmp1[0] != "in" && tmp1[0] != "out" && tmp1[0] != "proc")
        {
            cerr << "ERROR: Invalid module type " << tmp1[0] << endl;
            return 1;
        }

        ModuleType t;

        if (tmp1[0] == "in")
        {
            t = eInputModule;
        }
        else if (tmp1[0] == "out")
        {
            t = eOutputModule;
        }
        else if (tmp1[0] == "proc")
        {
            t = eProcessModule;
        }

        MeshSharedPtr m = boost::shared_ptr<Mesh>(new Mesh());
        ModuleSharedPtr mod = GetModuleFactory().CreateInstance(
            ModuleKey(t, tmp1[1]), m);
        cerr << "Options for module " << tmp1[1] << ":" << endl;
        mod->PrintConfig();
        return 1;
    }

    if (vm.count("help") || vm.count("input-file") != 1) {
        cerr << "Usage: NekMesh [options] inputfile.ext1 outputfile.ext2"
             << endl;
        cout << desc;
        return 1;
    }

    vector<string> inout = vm["input-file"].as<vector<string> >();

    if (inout.size() < 2)
    {
        cerr << "ERROR: You must specify an input and output file." << endl;
        return 1;
    }

    /*
     * Process list of modules. Each element of the vector of module strings can
     * be in the following form:
     *
     * modname:arg1=a:arg2=b:arg3=c:arg4:arg5=asd
     *
     * where the only required argument is 'modname', specifing the name of the
     * module to load.
     */

    MeshSharedPtr mesh = boost::shared_ptr<Mesh>(new Mesh());
    vector<ModuleSharedPtr> modules;
    vector<string>          modcmds;

    if (vm.count("verbose"))
    {
        mesh->m_verbose = true;
    }

    if (vm.count("module"))
    {
        modcmds = vm["module"].as<vector<string> >();
    }

    // Add input and output modules to beginning and end of this vector.
    modcmds.insert   (modcmds.begin(), inout[0]);
    modcmds.push_back(inout[1]);

    for (int i = 0; i < modcmds.size(); ++i)
    {
        // First split each command by the colon separator.
        vector<string> tmp1;
        ModuleKey module;
        int offset = 1;

        boost::split(tmp1, modcmds[i], boost::is_any_of(":"));

        if (i == 0 || i == modcmds.size() - 1)
        {
            module.first = (i == 0 ? eInputModule : eOutputModule);

            // If no colon detected, automatically detect mesh type from
            // file extension. Otherwise override and use tmp1[1] as the
            // module to load. This also allows us to pass options to
            // input/output modules. So, for example, to override
            // filename.xml to be read as vtk, you use:
            //
            // filename.xml:vtk:opt1=arg1:opt2=arg2
            if (tmp1.size() == 1)
            {
                int    dot    = tmp1[0].find_last_of('.') + 1;
                string ext    = tmp1[0].substr(dot, tmp1[0].length() - dot);
                module.second = ext;
                tmp1.push_back(string(i == 0 ? "infile=" : "outfile=")+tmp1[0]);
            }
            else
            {
                module.second = tmp1[1];
                tmp1.push_back(string(i == 0 ? "infile=" : "outfile=")+tmp1[0]);
                offset++;
            }
        }
        else
        {
            module.first  = eProcessModule;
            module.second = tmp1[0];
        }

        // Create module.
        ModuleSharedPtr mod = GetModuleFactory().CreateInstance(module,mesh);
        modules.push_back(mod);

        // Set options for this module.
        for (int j = offset; j < tmp1.size(); ++j)
        {
            vector<string> tmp2;
            boost::split(tmp2, tmp1[j], boost::is_any_of("="));

            if (tmp2.size() == 1)
            {
                mod->RegisterConfig(tmp2[0], "1");
            }
            else if (tmp2.size() == 2)
            {
                mod->RegisterConfig(tmp2[0], tmp2[1]);
            }
            else
            {
                cerr << "ERROR: Invalid module configuration: format is "
                     << "either :arg or :arg=val" << endl;
                abort();
            }
        }

        // Ensure configuration options have been set.
        mod->SetDefaults();
    }

    // Run mesh process.
    for (int i = 0; i < modules.size(); ++i)
    {
        modules[i]->Process();
    }

    return 0;
}