#include <PyrGeom.h>

Inheritance diagram for Nektar::SpatialDomains::PyrGeom:

Collaboration diagram for Nektar::SpatialDomains::PyrGeom:

Public Member Functions
	PyrGeom ()

	PyrGeom (const Geometry2DSharedPtr faces[])

	~PyrGeom ()

Public Member Functions inherited from Nektar::LibUtilities::GraphVertexObject
	GraphVertexObject ()

	GraphVertexObject (const GraphVertexID id)

int	getid ()

void	setid (const GraphVertexID id)

virtual	~GraphVertexObject ()

Public Member Functions inherited from Nektar::SpatialDomains::Geometry3D
	Geometry3D ()

	Geometry3D (const int coordim)

virtual	~Geometry3D ()

int	GetEid (int i) const
	Return the ID of edge i in this element. More...

const Geometry1DSharedPtr	GetEdge (int i) const

Geometry2DSharedPtr	GetFace (int i)
	Return face i in this element. More...

int	GetDir (const int faceidx, const int facedir) const
	Returns the element coordinate direction corresponding to a given face coordinate direction. More...

Public Member Functions inherited from Nektar::SpatialDomains::Geometry
	Geometry ()

	Geometry (int coordim)

virtual	~Geometry ()

bool	IsElmtConnected (int gvo_id, int locid) const

void	AddElmtConnected (int gvo_id, int locid)

int	NumElmtConnected () const

int	GetCoordim () const

void	SetCoordim (int coordim)

GeomFactorsSharedPtr	GetGeomFactors ()

GeomFactorsSharedPtr	GetRefGeomFactors (const Array< OneD, const LibUtilities::BasisSharedPtr > &tbasis)

GeomFactorsSharedPtr	GetMetricInfo ()

LibUtilities::ShapeType	GetShapeType (void)

int	GetGlobalID (void)

void	SetGlobalID (int globalid)

int	GetVid (int i) const

int	GetEid (int i) const

int	GetFid (int i) const

int	GetTid (int i) const

int	GetNumVerts () const

PointGeomSharedPtr	GetVertex (int i) const

StdRegions::Orientation	GetEorient (const int i) const

StdRegions::Orientation	GetPorient (const int i) const

StdRegions::Orientation	GetForient (const int i) const

int	GetNumEdges () const

int	GetNumFaces () const

int	GetShapeDim () const

StdRegions::StdExpansionSharedPtr	GetXmap () const

const Array< OneD, const NekDouble > &	GetCoeffs (const int i) const

bool	ContainsPoint (const Array< OneD, const NekDouble > &gloCoord, NekDouble tol=0.0)

bool	ContainsPoint (const Array< OneD, const NekDouble > &gloCoord, Array< OneD, NekDouble > &locCoord, NekDouble tol)

bool	ContainsPoint (const Array< OneD, const NekDouble > &gloCoord, Array< OneD, NekDouble > &locCoord, NekDouble tol, NekDouble &resid)

int	GetVertexEdgeMap (int i, int j) const

int	GetVertexFaceMap (int i, int j) const
	return the id of the $j^{th}$ face attached to the $i^{th}$ vertex More...

int	GetEdgeFaceMap (int i, int j) const

void	FillGeom ()
	Put all quadrature information into face/edge structure and backward transform. More...

NekDouble	GetLocCoords (const Array< OneD, const NekDouble > &coords, Array< OneD, NekDouble > &Lcoords)

NekDouble	GetCoord (const int i, const Array< OneD, const NekDouble > &Lcoord)
	Given local collapsed coordinate Lcoord return the value of physical coordinate in direction i. More...

void	SetOwnData ()

const LibUtilities::BasisSharedPtr	GetBasis (const int i)
	Return the j-th basis of the i-th co-ordinate dimension. More...

const LibUtilities::PointsKeyVector	GetPointsKeys ()

void	Reset (CurveMap &curvedEdges, CurveMap &curvedFaces)

Static Public Attributes
static const int	kNverts = 5

static const int	kNedges = 8

static const int	kNqfaces = 1

static const int	kNtfaces = 4

static const int	kNfaces = kNqfaces + kNtfaces

static const std::string	XMLElementType

Protected Member Functions
virtual void	v_GenGeomFactors ()

virtual NekDouble	v_GetLocCoords (const Array< OneD, const NekDouble > &coords, Array< OneD, NekDouble > &Lcoords)

virtual int	v_GetNumVerts () const

virtual int	v_GetNumEdges () const

virtual int	v_GetNumFaces () const

virtual int	v_GetDir (const int faceidx, const int facedir) const

virtual void	v_Reset (CurveMap &curvedEdges, CurveMap &curvedFaces)
	Reset this geometry object: unset the current state and remove allocated GeomFactors. More...

Protected Member Functions inherited from Nektar::SpatialDomains::Geometry3D
void	NewtonIterationForLocCoord (const Array< OneD, const NekDouble > &coords, const Array< OneD, const NekDouble > &ptsx, const Array< OneD, const NekDouble > &ptsy, const Array< OneD, const NekDouble > &ptsz, Array< OneD, NekDouble > &Lcoords, NekDouble &resid)

virtual void	v_FillGeom ()
	Put all quadrature information into face/edge structure and backward transform. More...

virtual NekDouble	v_GetCoord (const int i, const Array< OneD, const NekDouble > &Lcoord)
	Given local collapsed coordinate Lcoord return the value of physical coordinate in direction i. More...

virtual int	v_GetShapeDim () const
	Return the dimension of this element. More...

virtual int	v_GetVid (int i) const
	Return the vertex ID of vertex i. More...

virtual PointGeomSharedPtr	v_GetVertex (int i) const
	Return vertex i in this element. More...

virtual const SegGeomSharedPtr	v_GetEdge (int i) const
	Return edge i of this element. More...

virtual StdRegions::Orientation	v_GetEorient (const int i) const
	Return the orientation of edge i in this element. More...

virtual int	v_GetEid (int i) const
	Return the ID of edge i in this element. More...

virtual const Geometry2DSharedPtr	v_GetFace (int i) const
	Return face i in this element. More...

virtual StdRegions::Orientation	v_GetForient (const int i) const
	Return the orientation of face i in this element. More...

virtual int	v_GetFid (int i) const
	Return the ID of face i in this element. More...

virtual int	v_GetEid () const
	Return the ID of this element. More...

virtual int	v_WhichEdge (SegGeomSharedPtr edge)
	Return the local ID of a given edge. More...

virtual int	v_WhichFace (Geometry2DSharedPtr face)
	Return the local ID of a given face. More...

virtual const LibUtilities::BasisSharedPtr	v_GetBasis (const int i)
	Return the j-th basis of the i-th co-ordinate dimension. More...

virtual void	v_AddElmtConnected (int gvo_id, int locid)

virtual bool	v_IsElmtConnected (int gvo_id, int locid) const

virtual int	v_NumElmtConnected () const

virtual void	v_SetOwnData ()

Protected Member Functions inherited from Nektar::SpatialDomains::Geometry
void	GenGeomFactors ()

virtual StdRegions::Orientation	v_GetPorient (const int i) const

virtual StdRegions::StdExpansionSharedPtr	v_GetXmap () const

virtual int	v_GetCoordim () const

virtual bool	v_ContainsPoint (const Array< OneD, const NekDouble > &gloCoord, NekDouble tol=0.0)

virtual bool	v_ContainsPoint (const Array< OneD, const NekDouble > &gloCoord, Array< OneD, NekDouble > &locCoord, NekDouble tol)

virtual bool	v_ContainsPoint (const Array< OneD, const NekDouble > &gloCoord, Array< OneD, NekDouble > &locCoord, NekDouble tol, NekDouble &resid)

virtual int	v_GetVertexEdgeMap (int i, int j) const

virtual int	v_GetVertexFaceMap (int i, int j) const

virtual int	v_GetEdgeFaceMap (int i, int j) const

void	SetUpCoeffs (const int nCoeffs)
	Initialise the m_coeffs array. More...

Private Member Functions
void	SetUpLocalEdges ()

void	SetUpLocalVertices ()

void	SetUpEdgeOrientation ()

void	SetUpFaceOrientation ()

void	SetUpXmap ()
	Set up the m_xmap object by determining the order of each direction from derived faces. More...

Additional Inherited Members
Static Protected Member Functions inherited from Nektar::SpatialDomains::Geometry
static GeomFactorsSharedPtr	ValidateRegGeomFactor (GeomFactorsSharedPtr geomFactor)

Protected Attributes inherited from Nektar::LibUtilities::GraphVertexObject
GraphVertexID	m_id

Protected Attributes inherited from Nektar::SpatialDomains::Geometry3D
PointGeomVector	m_verts

SegGeomVector	m_edges

Geometry2DVector	m_faces

std::vector < StdRegions::Orientation >	m_eorient

std::vector < StdRegions::Orientation >	m_forient

std::list< CompToElmt >	m_elmtmap

bool	m_owndata

int	m_eid

bool	m_ownverts

Protected Attributes inherited from Nektar::SpatialDomains::Geometry
int	m_coordim
	coordinate dimension More...

GeomFactorsSharedPtr	m_geomFactors

GeomState	m_geomFactorsState

StdRegions::StdExpansionSharedPtr	m_xmap

GeomState	m_state
	enum identifier to determine if quad points are filled More...

GeomType	m_geomType

LibUtilities::ShapeType	m_shapeType

int	m_globalID

Array< OneD, Array< OneD, NekDouble > >	m_coeffs

Static Protected Attributes inherited from Nektar::SpatialDomains::Geometry
static GeomFactorsVector	m_regGeomFactorsManager

Detailed Description

Definition at line 48 of file PyrGeom.h.

Constructor & Destructor Documentation

Nektar::SpatialDomains::PyrGeom::PyrGeom ( )

Definition at line 51 of file PyrGeom.cpp.

References Nektar::LibUtilities::ePyramid.

         {
             m_shapeType = LibUtilities::ePyramid;
         }

Nektar::SpatialDomains::PyrGeom::PyrGeom ( const Geometry2DSharedPtr faces[] )

Copy the face shared pointers

Set up orientation vectors with correct amount of elements.

Definition at line 56 of file PyrGeom.cpp.

References Nektar::LibUtilities::ePyramid, kNedges, kNfaces, Nektar::SpatialDomains::Geometry3D::m_eorient, Nektar::SpatialDomains::Geometry3D::m_faces, Nektar::SpatialDomains::Geometry3D::m_forient, Nektar::SpatialDomains::Geometry::m_shapeType, Nektar::SpatialDomains::Geometry::m_xmap, Nektar::SpatialDomains::Geometry::SetUpCoeffs(), SetUpEdgeOrientation(), SetUpFaceOrientation(), SetUpLocalEdges(), SetUpLocalVertices(), and SetUpXmap().

                                                           :
             Geometry3D(faces[0]->GetEdge(0)->GetVertex(0)->GetCoordim())
         {
             m_shapeType = LibUtilities::ePyramid;
 
             /// Copy the face shared pointers
             m_faces.insert(m_faces.begin(), faces, faces+PyrGeom::kNfaces);
 
             /// Set up orientation vectors with correct amount of elements.
             m_eorient.resize(kNedges);
             m_forient.resize(kNfaces);
 
             SetUpLocalEdges();
             SetUpLocalVertices();
             SetUpEdgeOrientation();
             SetUpFaceOrientation();
             SetUpXmap();
             SetUpCoeffs(m_xmap->GetNcoeffs());
         }

Nektar::SpatialDomains::PyrGeom::~PyrGeom ( )

Definition at line 76 of file PyrGeom.cpp.

         {
 
         }

Member Function Documentation

void Nektar::SpatialDomains::PyrGeom::SetUpEdgeOrientation ( )

private

Definition at line 393 of file PyrGeom.cpp.

References ASSERTL0, Nektar::StdRegions::eBackwards, Nektar::StdRegions::eForwards, Nektar::SpatialDomains::Geometry::GetVid(), kNedges, Nektar::SpatialDomains::Geometry3D::m_edges, Nektar::SpatialDomains::Geometry3D::m_eorient, and Nektar::SpatialDomains::Geometry3D::m_verts.

Referenced by PyrGeom().

         {
             // This 2D array holds the local id's of all the vertices for every
             // edge. For every edge, they are ordered to what we define as being
             // Forwards.
             const unsigned int edgeVerts[kNedges][2] =
                 { {0,1}, {1,2}, {3,2}, {0,3}, {0,4}, {1,4}, {2,4}, {3,4} };
 
             int i;
             for (i = 0; i < kNedges; i++)
             {
                 if (m_edges[i]->GetVid(0) == m_verts[edgeVerts[i][0]]->GetVid())
                 {
                     m_eorient[i] = StdRegions::eForwards;
                 }
                 else if (m_edges[i]->GetVid(0) == m_verts[edgeVerts[i][1]]->GetVid())
                 {
                     m_eorient[i] = StdRegions::eBackwards;
                 }
                 else
                 {
                     ASSERTL0(false,"Could not find matching vertex for the edge");
                 }
             }
         }

void Nektar::SpatialDomains::PyrGeom::SetUpFaceOrientation ( )

private

Definition at line 419 of file PyrGeom.cpp.

References ASSERTL0, Nektar::SpatialDomains::Geometry::GetVertex(), Nektar::SpatialDomains::Geometry::GetVid(), Nektar::NekConstants::kNekZeroTol, kNfaces, kNqfaces, kNtfaces, Nektar::SpatialDomains::Geometry::m_coordim, Nektar::SpatialDomains::Geometry3D::m_faces, Nektar::SpatialDomains::Geometry3D::m_forient, and Nektar::SpatialDomains::Geometry3D::m_verts.

Referenced by PyrGeom().

         {
             int f,i;
 
             // These arrays represent the vector of the A and B coordinate of
             // the local elemental coordinate system where A corresponds with
             // the coordinate direction xi_i with the lowest index i (for that
             // particular face) Coordinate 'B' then corresponds to the other
             // local coordinate (i.e. with the highest index)
             Array<OneD,NekDouble> elementAaxis(m_coordim);
             Array<OneD,NekDouble> elementBaxis(m_coordim);
 
             // These arrays correspond to the local coordinate
             // system of the face itself (i.e. the Geometry2D)
             // faceAaxis correspond to the xi_0 axis
             // faceBaxis correspond to the xi_1 axis
             Array<OneD,NekDouble> faceAaxis(m_coordim);
             Array<OneD,NekDouble> faceBaxis(m_coordim);
 
             // This is the base vertex of the face (i.e. the Geometry2D) This
             // corresponds to thevertex with local ID 0 of the Geometry2D
             unsigned int baseVertex;
 
             // The lenght of the vectors above
             NekDouble elementAaxis_length;
             NekDouble elementBaxis_length;
             NekDouble faceAaxis_length;
             NekDouble faceBaxis_length;
 
             // This 2D array holds the local id's of all the vertices for every
             // face. For every face, they are ordered in such a way that the
             // implementation below allows a unified approach for all faces.
             const unsigned int faceVerts[kNfaces][4] = {
                 {0,1,2,3},
                 {0,1,4,0}, // Last four elements are triangles which only
                 {1,2,4,0}, // require three vertices.
                 {3,2,4,0},
                 {0,3,4,0}
             };
 
             NekDouble dotproduct1 = 0.0;
             NekDouble dotproduct2 = 0.0;
 
             unsigned int orientation;
 
             // Loop over all the faces to set up the orientation
             for(f = 0; f < kNqfaces + kNtfaces; f++)
             {
                 // initialisation
                 elementAaxis_length = 0.0;
                 elementBaxis_length = 0.0;
                 faceAaxis_length = 0.0;
                 faceBaxis_length = 0.0;
 
                 dotproduct1 = 0.0;
                 dotproduct2 = 0.0;
 
                 baseVertex = m_faces[f]->GetVid(0);
 
                 // We are going to construct the vectors representing the A and
                 // B axis of every face. These vectors will be constructed as a
                 // vector-representation of the edges of the face. However, for
                 // both coordinate directions, we can represent the vectors by
                 // two different edges. That's why we need to make sure that we
                 // pick the edge to which the baseVertex of the
                 // Geometry2D-representation of the face belongs...
 
                 // Compute the length of edges on a base-face
                 if (f > 0)
                 {
                     for(i = 0; i < m_coordim; i++)
                     {
                         elementAaxis[i] = (*m_verts[ faceVerts[f][1] ])[i] - (*m_verts[ faceVerts[f][0] ])[i];
                         elementBaxis[i] = (*m_verts[ faceVerts[f][2] ])[i] - (*m_verts[ faceVerts[f][0] ])[i];
                     }
                 }
                 else
                 {
                     if( baseVertex == m_verts[ faceVerts[f][0] ]->GetVid() )
                     {
                         for(i = 0; i < m_coordim; i++)
                         {
                             elementAaxis[i] = (*m_verts[ faceVerts[f][1] ])[i] - (*m_verts[ faceVerts[f][0] ])[i];
                             elementBaxis[i] = (*m_verts[ faceVerts[f][3] ])[i] - (*m_verts[ faceVerts[f][0] ])[i];
                         }
                     }
                     else if( baseVertex == m_verts[ faceVerts[f][1] ]->GetVid() )
                     {
                         for(i = 0; i < m_coordim; i++)
                         {
                             elementAaxis[i] = (*m_verts[ faceVerts[f][1] ])[i] - (*m_verts[ faceVerts[f][0] ])[i];
                             elementBaxis[i] = (*m_verts[ faceVerts[f][2] ])[i] - (*m_verts[ faceVerts[f][1] ])[i];
                         }
                     }
                     else if( baseVertex == m_verts[ faceVerts[f][2] ]->GetVid() )
                     {
                         for(i = 0; i < m_coordim; i++)
                         {
                             elementAaxis[i] = (*m_verts[ faceVerts[f][2] ])[i] - (*m_verts[ faceVerts[f][3] ])[i];
                             elementBaxis[i] = (*m_verts[ faceVerts[f][2] ])[i] - (*m_verts[ faceVerts[f][1] ])[i];
                         }
                     }
                     else if( baseVertex == m_verts[ faceVerts[f][3] ]->GetVid() )
                     {
                         for(i = 0; i < m_coordim; i++)
                         {
                             elementAaxis[i] = (*m_verts[ faceVerts[f][2] ])[i] - (*m_verts[ faceVerts[f][3] ])[i];
                             elementBaxis[i] = (*m_verts[ faceVerts[f][3] ])[i] - (*m_verts[ faceVerts[f][0] ])[i];
                         }
                     }
                     else
                     {
                         ASSERTL0(false, "Could not find matching vertex for the face");
                     }
                 }
 
                 // Now, construct the edge-vectors of the local coordinates of
                 // the Geometry2D-representation of the face
                 for(i = 0; i < m_coordim; i++)
                 {
                     int v = m_faces[f]->GetNumVerts()-1;
                     faceAaxis[i] = (*m_faces[f]->GetVertex(1))[i] - (*m_faces[f]->GetVertex(0))[i];
                     faceBaxis[i] = (*m_faces[f]->GetVertex(v))[i] - (*m_faces[f]->GetVertex(0))[i];
 
                     elementAaxis_length += pow(elementAaxis[i],2);
                     elementBaxis_length += pow(elementBaxis[i],2);
                     faceAaxis_length += pow(faceAaxis[i],2);
                     faceBaxis_length += pow(faceBaxis[i],2);
                 }
 
                 elementAaxis_length = sqrt(elementAaxis_length);
                 elementBaxis_length = sqrt(elementBaxis_length);
                 faceAaxis_length = sqrt(faceAaxis_length);
                 faceBaxis_length = sqrt(faceBaxis_length);
 
                 // Calculate the inner product of both the A-axis
                 // (i.e. Elemental A axis and face A axis)
                 for(i = 0 ; i < m_coordim; i++)
                 {
                     dotproduct1 += elementAaxis[i]*faceAaxis[i];
                 }
 
                 orientation = 0;
                 // if the innerproduct is equal to the (absolute value of the ) products of the lengths
                 // of both vectors, then, the coordinate systems will NOT be transposed
                 if( fabs(elementAaxis_length*faceAaxis_length - fabs(dotproduct1)) < NekConstants::kNekZeroTol )
                 {
                     // if the inner product is negative, both A-axis point
                     // in reverse direction
                     if(dotproduct1 < 0.0)
                     {
                         orientation += 2;
                     }
 
                     // calculate the inner product of both B-axis
                     for(i = 0 ; i < m_coordim; i++)
                     {
                         dotproduct2 += elementBaxis[i]*faceBaxis[i];
                     }
 
                     // if the inner product is negative, both B-axis point
                     // in reverse direction
                     if( dotproduct2 < 0.0 )
                     {
                         orientation++;
                     }
                 }
                 // The coordinate systems are transposed
                 else
                 {
                     orientation = 4;
 
                     // Calculate the inner product between the elemental A-axis
                     // and the B-axis of the face (which are now the corresponding axis)
                     dotproduct1 = 0.0;
                     for(i = 0 ; i < m_coordim; i++)
                     {
                         dotproduct1 += elementAaxis[i]*faceBaxis[i];
                     }
 
                     // check that both these axis are indeed parallel
                     if (fabs(elementAaxis_length*faceBaxis_length
                             - fabs(dotproduct1)) > NekConstants::kNekZeroTol)
                     {
                         cout << "Warning: Prism axes not parallel" << endl;
                     }
 
                     // if the result is negative, both axis point in reverse
                     // directions
                     if(dotproduct1 < 0.0)
                     {
                         orientation += 2;
                     }
 
                     // Do the same for the other two corresponding axis
                     dotproduct2 = 0.0;
                     for(i = 0 ; i < m_coordim; i++)
                     {
                         dotproduct2 += elementBaxis[i]*faceAaxis[i];
                     }
 
                     // check that both these axis are indeed parallel
                     if (fabs(elementBaxis_length*faceAaxis_length
                             - fabs(dotproduct2)) > NekConstants::kNekZeroTol)
                     {
                         cout << "Warning: Prism axes not parallel" << endl;
                     }
 
                     if( dotproduct2 < 0.0 )
                     {
                         orientation++;
                     }
                 }
 
                 orientation = orientation + 5;
 
                 // Fill the m_forient array
                 m_forient[f] = (StdRegions::Orientation) orientation;
             }
         }

void Nektar::SpatialDomains::PyrGeom::SetUpLocalEdges ( )

private

Definition at line 215 of file PyrGeom.cpp.

References ASSERTL0, Nektar::SpatialDomains::Geometry3D::GetEdge(), Nektar::SpatialDomains::Geometry3D::GetEid(), Nektar::SpatialDomains::Geometry::GetFid(), Nektar::SpatialDomains::Geometry3D::m_edges, and Nektar::SpatialDomains::Geometry3D::m_faces.

Referenced by PyrGeom().

         {
             // find edge 0
             int i,j;
             unsigned int check;
 
             SegGeomSharedPtr edge;
 
             // First set up the 4 bottom edges
             int f;
             for (f = 1; f < 5; f++)
             {
                 int nEdges = m_faces[f]->GetNumEdges();
                 check = 0;
                 for (i = 0; i < 4; i++)
                 {
                     for (j = 0; j < nEdges; j++)
                     {
                         if (m_faces[0]->GetEid(i) == m_faces[f]->GetEid(j))
                         {
                             edge = boost::dynamic_pointer_cast<SegGeom>((m_faces[0])->GetEdge(i));
                             m_edges.push_back(edge);
                             check++;
                         }
                     }
                 }
 
                 if (check < 1)
                 {
                     std::ostringstream errstrm;
                     errstrm << "Connected faces do not share an edge. Faces ";
                     errstrm << (m_faces[0])->GetFid() << ", " << (m_faces[f])->GetFid();
                     ASSERTL0(false, errstrm.str());
                 }
                 else if (check > 1)
                 {
                     std::ostringstream errstrm;
                     errstrm << "Connected faces share more than one edge. Faces ";
                     errstrm << (m_faces[0])->GetFid() << ", " << (m_faces[f])->GetFid();
                     ASSERTL0(false, errstrm.str());
                 }
             }
 
             // Then, set up the 4 vertical edges
             check = 0;
             for(i = 0; i < 3; i++) //Set up the vertical edge :face(1) and face(4)
             {
                 for(j = 0; j < 3; j++)
                 {
                     if( (m_faces[1])->GetEid(i) == (m_faces[4])->GetEid(j) )
                     {
                         edge = boost::dynamic_pointer_cast<SegGeom>((m_faces[1])->GetEdge(i));
                         m_edges.push_back(edge);
                         check++;
                     }
                 }
             }
             if( check < 1 )
             {
                 std::ostringstream errstrm;
                 errstrm << "Connected faces do not share an edge. Faces ";
                 errstrm << (m_faces[1])->GetFid() << ", " << (m_faces[4])->GetFid();
                 ASSERTL0(false, errstrm.str());
             }
             else if( check > 1)
             {
                 std::ostringstream errstrm;
                 errstrm << "Connected faces share more than one edge. Faces ";
                 errstrm << (m_faces[1])->GetFid() << ", " << (m_faces[4])->GetFid();
                 ASSERTL0(false, errstrm.str());
             }
 
             // Set up vertical edges: face(1) through face(4)
             for (f = 1; f < 4; f++)
             {
                 check = 0;
                 for(i = 0; i < m_faces[f]->GetNumEdges(); i++)
                 {
                     for(j = 0; j < m_faces[f+1]->GetNumEdges(); j++)
                     {
                         if( (m_faces[f])->GetEid(i) == (m_faces[f+1])->GetEid(j))
                         {
                             edge = boost::dynamic_pointer_cast<SegGeom>((m_faces[f])->GetEdge(i));
                             m_edges.push_back(edge);
                             check++;
                         }
                     }
                 }
 
                 if( check < 1 )
                 {
                     std::ostringstream errstrm;
                     errstrm << "Connected faces do not share an edge. Faces ";
                     errstrm << (m_faces[f])->GetFid() << ", " << (m_faces[f+1])->GetFid();
                     ASSERTL0(false, errstrm.str());
                 }
                 else if( check > 1)
                 {
                     std::ostringstream errstrm;
                     errstrm << "Connected faces share more than one edge. Faces ";
                     errstrm << (m_faces[f])->GetFid() << ", " << (m_faces[f+1])->GetFid();
                     ASSERTL0(false, errstrm.str());
                 }
             }
         }

void Nektar::SpatialDomains::PyrGeom::SetUpLocalVertices ( )

private

Definition at line 321 of file PyrGeom.cpp.

References ASSERTL0, Nektar::SpatialDomains::Geometry::GetVertex(), Nektar::SpatialDomains::Geometry::GetVid(), Nektar::SpatialDomains::Geometry3D::m_edges, and Nektar::SpatialDomains::Geometry3D::m_verts.

Referenced by PyrGeom().

         {
             // Set up the first 2 vertices (i.e. vertex 0,1)
             if (m_edges[0]->GetVid(0) == m_edges[1]->GetVid(0) ||
                 m_edges[0]->GetVid(0) == m_edges[1]->GetVid(1))
             {
                 m_verts.push_back(m_edges[0]->GetVertex(1));
                 m_verts.push_back(m_edges[0]->GetVertex(0));
             }
             else if (m_edges[0]->GetVid(1) == m_edges[1]->GetVid(0) ||
                      m_edges[0]->GetVid(1) == m_edges[1]->GetVid(1))
             {
                 m_verts.push_back(m_edges[0]->GetVertex(0));
                 m_verts.push_back(m_edges[0]->GetVertex(1));
             }
             else
             {
                 std::ostringstream errstrm;
                 errstrm << "Connected edges do not share a vertex. Edges ";
                 errstrm << m_edges[0]->GetEid() << ", " << m_edges[1]->GetEid();
                 ASSERTL0(false, errstrm.str());
             }
 
             // set up the other bottom vertices (i.e. vertex 2,3)
             for(int i = 1; i < 3; i++)
             {
                 if (m_edges[i]->GetVid(0) == m_verts[i]->GetVid())
                 {
                     m_verts.push_back(m_edges[i]->GetVertex(1));
                 }
                 else if (m_edges[i]->GetVid(1) == m_verts[i]->GetVid())
                 {
                     m_verts.push_back(m_edges[i]->GetVertex(0));
                 }
                 else
                 {
                     std::ostringstream errstrm;
                     errstrm << "Connected edges do not share a vertex. Edges ";
                     errstrm << m_edges[i]->GetEid() << ", " << m_edges[i-1]->GetEid();
                     ASSERTL0(false, errstrm.str());
                 }
             }
 
             // set up top vertex
             if (m_edges[4]->GetVid(0) == m_verts[0]->GetVid())
             {
                 m_verts.push_back(m_edges[4]->GetVertex(1));
             }
             else
             {
                 m_verts.push_back(m_edges[4]->GetVertex(0));
             }
 
             int check = 0;
             for (int i = 5; i < 8; ++i)
             {
                 if( (m_edges[i]->GetVid(0) == m_verts[i-4]->GetVid()
                     && m_edges[i]->GetVid(1) == m_verts[4]->GetVid())
                     ||(m_edges[i]->GetVid(1) == m_verts[i-4]->GetVid()
                     && m_edges[i]->GetVid(0) == m_verts[4]->GetVid()))
                 {
                     check++;
                 }
             }
             if (check != 3) {
                 std::ostringstream errstrm;
                 errstrm << "Connected edges do not share a vertex. Edges ";
                 errstrm << m_edges[3]->GetEid() << ", " << m_edges[2]->GetEid();
                 ASSERTL0(false, errstrm.str());
             }
         }

void Nektar::SpatialDomains::PyrGeom::SetUpXmap ( )

private

Set up the m_xmap object by determining the order of each direction from derived faces.

Definition at line 659 of file PyrGeom.cpp.

References Nektar::MemoryManager< DataType >::AllocateSharedPtr(), Nektar::LibUtilities::eGaussLobattoLegendre, Nektar::LibUtilities::eGaussRadauMAlpha2Beta0, Nektar::LibUtilities::eModified_A, Nektar::LibUtilities::eModified_C, Nektar::SpatialDomains::Geometry::GetXmap(), Nektar::SpatialDomains::Geometry3D::m_faces, Nektar::SpatialDomains::Geometry3D::m_forient, and Nektar::SpatialDomains::Geometry::m_xmap.

Referenced by PyrGeom(), and v_Reset().

         {
             vector<int> tmp;
             int order0, order1;
 
             if (m_forient[0] < 9)
             {
                 tmp.push_back(m_faces[0]->GetXmap()->GetEdgeNcoeffs(0));
                 tmp.push_back(m_faces[0]->GetXmap()->GetEdgeNcoeffs(2));
                 order0 = *max_element(tmp.begin(), tmp.end());
             }
             else
             {
                 tmp.push_back(m_faces[0]->GetXmap()->GetEdgeNcoeffs(1));
                 tmp.push_back(m_faces[0]->GetXmap()->GetEdgeNcoeffs(3));
                 order0 = *max_element(tmp.begin(), tmp.end());
             }
 
             if (m_forient[0] < 9)
             {
                 tmp.clear();
                 tmp.push_back(m_faces[0]->GetXmap()->GetEdgeNcoeffs(1));
                 tmp.push_back(m_faces[0]->GetXmap()->GetEdgeNcoeffs(3));
                 tmp.push_back(m_faces[2]->GetXmap()->GetEdgeNcoeffs(2));
                 order1 = *max_element(tmp.begin(), tmp.end());
             }
             else
             {
                 tmp.clear();
                 tmp.push_back(m_faces[0]->GetXmap()->GetEdgeNcoeffs(0));
                 tmp.push_back(m_faces[0]->GetXmap()->GetEdgeNcoeffs(2));
                 tmp.push_back(m_faces[2]->GetXmap()->GetEdgeNcoeffs(2));
                 order1 = *max_element(tmp.begin(), tmp.end());
             }
 
             tmp.clear();
             tmp.push_back(order0);
             tmp.push_back(order1);
             tmp.push_back(m_faces[1]->GetXmap()->GetEdgeNcoeffs(1));
             tmp.push_back(m_faces[1]->GetXmap()->GetEdgeNcoeffs(2));
             tmp.push_back(m_faces[3]->GetXmap()->GetEdgeNcoeffs(1));
             tmp.push_back(m_faces[3]->GetXmap()->GetEdgeNcoeffs(2));
             int order2 = *max_element(tmp.begin(), tmp.end());
 
 
             const LibUtilities::BasisKey A1(
                 LibUtilities::eModified_A, order0,
                 LibUtilities::PointsKey(
                     order0+1, LibUtilities::eGaussLobattoLegendre));
             const LibUtilities::BasisKey A2(
                 LibUtilities::eModified_A, order1,
                 LibUtilities::PointsKey(
                     order1+1, LibUtilities::eGaussLobattoLegendre));
             const LibUtilities::BasisKey C(
                 LibUtilities::eModified_C, order2,
                 LibUtilities::PointsKey(
                     order2, LibUtilities::eGaussRadauMAlpha2Beta0));
 
             m_xmap = MemoryManager<StdRegions::StdPyrExp>::AllocateSharedPtr(
                 A1, A2, C);
         }

void Nektar::SpatialDomains::PyrGeom::v_GenGeomFactors ( )

protectedvirtual

Generate the geometry factors for this element.

Reimplemented from Nektar::SpatialDomains::Geometry3D.

Definition at line 81 of file PyrGeom.cpp.

         {
             if (m_geomFactorsState != ePtsFilled)
             {
                 int i;
                 GeomType Gtype = eRegular;
 
                 v_FillGeom();
 
                 // check to see if expansions are linear
                 for(i = 0; i < m_coordim; ++i)
                 {
                     if (m_xmap->GetBasisNumModes(0) != 2 ||
                         m_xmap->GetBasisNumModes(1) != 2 ||
                         m_xmap->GetBasisNumModes(2) != 2 )
                     {
                         Gtype = eDeformed;
                     }
                 }
 
                 // check to see if all quadrilateral faces are parallelograms
                 if(Gtype == eRegular)
                 {
                     // Ensure each face is a parallelogram? Check this.
                     for (i = 0; i < m_coordim; i++)
                     {
                         if( fabs( (*m_verts[0])(i) -
                                   (*m_verts[1])(i) +
                                   (*m_verts[2])(i) -
                                   (*m_verts[3])(i) )
                             > NekConstants::kNekZeroTol )
                         {
                             Gtype = eDeformed;
                             break;
                         }
                     }
                 }
 
                 m_geomFactors = MemoryManager<GeomFactors>::AllocateSharedPtr(
                     Gtype, m_coordim, m_xmap, m_coeffs);
                 m_geomFactorsState = ePtsFilled;
             }
         }

int Nektar::SpatialDomains::PyrGeom::v_GetDir	(	const int	faceidx,
		const int	facedir
	)		const

protectedvirtual

Implements Nektar::SpatialDomains::Geometry3D.

Definition at line 199 of file PyrGeom.cpp.

         {
             if (faceidx == 0)
             {
                 return facedir;
             }
             else if (faceidx == 1 || faceidx == 3)
             {
                 return 2 * facedir;
             }
             else
             {
                 return 1 + facedir;
             }
         }

NekDouble Nektar::SpatialDomains::PyrGeom::v_GetLocCoords	(	const Array< OneD, const NekDouble > &	coords,
		Array< OneD, NekDouble > &	Lcoords
	)

protectedvirtual

Reimplemented from Nektar::SpatialDomains::Geometry.

Definition at line 125 of file PyrGeom.cpp.

References Nektar::SpatialDomains::PointGeom::dist(), Nektar::SpatialDomains::PointGeom::dot(), ErrorUtil::efatal, Nektar::SpatialDomains::eRegular, Nektar::SpatialDomains::Geometry::GetMetricInfo(), Nektar::SpatialDomains::Geometry::m_coordim, Nektar::SpatialDomains::Geometry3D::m_verts, Nektar::SpatialDomains::PointGeom::Mult(), NEKERROR, Nektar::SpatialDomains::PointGeom::Sub(), and Nektar::SpatialDomains::Geometry3D::v_FillGeom().

         {
             NekDouble ptdist = 1e6;
 
             v_FillGeom();
 
             // calculate local coordinate for coord
             if(GetMetricInfo()->GetGtype() == eRegular)
             {   // Based on Spen's book, page 99
 
                 // Point inside tetrahedron
                 PointGeom r(m_coordim, 0, coords[0], coords[1], coords[2]);
 
                 // Edges
                 PointGeom er0, e10, e30, e40;
                 er0.Sub(r,*m_verts[0]);
                 e10.Sub(*m_verts[1],*m_verts[0]);
                 e30.Sub(*m_verts[3],*m_verts[0]);
                 e40.Sub(*m_verts[4],*m_verts[0]);
 
 
                 // Cross products (Normal times area)
                 PointGeom cp1030, cp3040, cp4010;
                 cp1030.Mult(e10,e30);
                 cp3040.Mult(e30,e40);
                 cp4010.Mult(e40,e10);
 
 
                 // Barycentric coordinates (relative volume)
                 NekDouble V = e40.dot(cp1030); // Pyramid Volume = {(e40)dot(e10)x(e30)}/4
                 NekDouble scaleFactor = 2.0/3.0;
                 NekDouble v1 = er0.dot(cp3040) / V; // volume1 = {(er0)dot(e30)x(e40)}/6
                 NekDouble v2 = er0.dot(cp4010) / V; // volume2 = {(er0)dot(e40)x(e10)}/6
                 NekDouble beta  = v1 * scaleFactor;
                 NekDouble gamma = v2 * scaleFactor;
                 NekDouble delta = er0.dot(cp1030) / V; // volume3 = {(er0)dot(e10)x(e30)}/4
 
                 // Make Pyramid bigger
                 Lcoords[0] = 2.0*beta  - 1.0;
                 Lcoords[1] = 2.0*gamma - 1.0;
                 Lcoords[2] = 2.0*delta - 1.0;
 
                 // Set ptdist to distance to nearest vertex
                 for(int i = 0; i < 5; ++i)
                 {
                     ptdist = min(ptdist,r.dist(*m_verts[i]));
                 }
 
             }
             else
             {
                 NEKERROR(ErrorUtil::efatal,
                          "inverse mapping must be set up to use this call");
             }
             return ptdist;
         }

int Nektar::SpatialDomains::PyrGeom::v_GetNumEdges ( ) const

protectedvirtual

Reimplemented from Nektar::SpatialDomains::Geometry.

Definition at line 189 of file PyrGeom.cpp.

         {
             return 8;
         }

int Nektar::SpatialDomains::PyrGeom::v_GetNumFaces ( ) const

protectedvirtual

Reimplemented from Nektar::SpatialDomains::Geometry.

Definition at line 194 of file PyrGeom.cpp.

         {
             return 5;
         }

int Nektar::SpatialDomains::PyrGeom::v_GetNumVerts ( ) const

protectedvirtual

Reimplemented from Nektar::SpatialDomains::Geometry.

Definition at line 184 of file PyrGeom.cpp.

         {
             return 5;
         }

void Nektar::SpatialDomains::PyrGeom::v_Reset	(	CurveMap &	curvedEdges,
		CurveMap &	curvedFaces
	)

protectedvirtual

Reset this geometry object: unset the current state and remove allocated GeomFactors.

Reimplemented from Nektar::SpatialDomains::Geometry.

Definition at line 640 of file PyrGeom.cpp.

References Nektar::SpatialDomains::Geometry3D::m_faces, Nektar::SpatialDomains::Geometry::m_xmap, Nektar::SpatialDomains::Geometry::SetUpCoeffs(), SetUpXmap(), and Nektar::SpatialDomains::Geometry::v_Reset().

         {
             Geometry::v_Reset(curvedEdges, curvedFaces);
 
             for (int i = 0; i < 5; ++i)
             {
                 m_faces[i]->Reset(curvedEdges, curvedFaces);
             }
 
             SetUpXmap();
             SetUpCoeffs(m_xmap->GetNcoeffs());
         }