ExtractCriticalLayer.cpp

Go to the documentation of this file.

///////////////////////////////////////////////////////////////////////////////
//
// File ExtractCriticalLayer.cpp
//
// For more information, please see: http://www.nektar.info
//
// The MIT License
//
// Copyright (c) 2006 Division of Applied Mathematics, Brown University (USA),
// Department of Aeronautics, Imperial College London (UK), and Scientific
// Computing and Imaging Institute, University of Utah (USA).
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the "Software"),
// to deal in the Software without restriction, including without limitation
// the rights to use, copy, modify, merge, publish, distribute, sublicense,
// and/or sell copies of the Software, and to permit persons to whom the
// Software is furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included
// in all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
// THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
// FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
// DEALINGS IN THE SOFTWARE.
//
// Description: Extract location of critical layer from streak file
//
///////////////////////////////////////////////////////////////////////////////
 
#include <cstdio>
#include <cstdlib>
 
#include <MultiRegions/ExpList.h>
#include <MultiRegions/ExpList2D.h>
 
 
void Computestreakpositions(MultiRegions::ExpListSharedPtr &streak,
                            Array<OneD, NekDouble> &xc,
                            Array<OneD, NekDouble> &yc,
                            NekDouble cr,
                            NekDouble trans);
 
int main(int argc, char *argv[])
{
    int i,j;
    NekDouble cr = 0;
 
    if(argc !=3)
    {
        fprintf(stderr,"Usage: ./ExtractCriticalLayer  meshfile fieldfile  \n");
        exit(1);
    }
 
    //------------------------------------------------------------
    // Create Session file.
    LibUtilities::SessionReaderSharedPtr vSession
        = LibUtilities::SessionReader::CreateInstance(argc, argv);
    //-----------------------------------------------------------
 
    //-------------------------------------------------------------
    // Read in mesh from input file
    SpatialDomains::MeshGraphSharedPtr graphShPt = SpatialDomains::MeshGraph::Read(vSession);
    //------------------------------------------------------------
 
    //-------------------------------------------------------------
    // Define Streak Expansion
    MultiRegions::ExpListSharedPtr streak;
 
    streak = MemoryManager<MultiRegions::ExpList2D>
        ::AllocateSharedPtr(vSession,graphShPt);
 
    //---------------------------------------------------------------
 
    //----------------------------------------------
    // Import field file.
    string fieldfile(argv[argc-1]);
    vector<SpatialDomains::FieldDefinitionsSharedPtr> fielddef;
    vector<vector<NekDouble> > fielddata;
    graphShPt->Import(fieldfile,fielddef,fielddata);
    //----------------------------------------------
 
    //----------------------------------------------
    // Copy data from field file
    string  streak_field("w");
    for(unsigned int i = 0; i < fielddata.size(); ++i)
    {
        streak->ExtractDataToCoeffs(fielddef [i],
                                    fielddata[i],
                                    streak_field);
    }
    //----------------------------------------------
 
    int npts;
    vSession->LoadParameter("NumCriticalLayerPts",npts,30);
    Array<OneD, NekDouble> x_c(npts);
    Array<OneD, NekDouble> y_c(npts);
    NekDouble xc, yc;
 
    NekDouble trans;
    vSession->LoadParameter("WidthOfLayers",trans,0.1);
 
    Computestreakpositions(streak,x_c, y_c,cr,trans);
 
    cout << "# x_c y_c" << endl;
    for(i = 0; i < npts; ++i)
    {
        fprintf(stdout,"%12.10lf %12.10lf \n",x_c[i],y_c[i]);
        //cout << x_c[i] << " " << y_c[i] << endl;
    }
 
}
 
void Computestreakpositions(MultiRegions::ExpListSharedPtr &streak,
                            Array<OneD, NekDouble> &xc,
                            Array<OneD, NekDouble> &yc,
                            NekDouble cr,
                            NekDouble trans)
{
    int i;
    int npts = xc.size();
 
    int nq = streak->GetTotPoints();
    Array<OneD, NekDouble> derstreak(nq);
    Array<OneD, NekDouble> x(nq);
    Array<OneD, NekDouble> y(nq);
    streak->GetCoords(x,y);
 
    streak->BwdTrans(streak->GetCoeffs(),streak->UpdatePhys());
    streak->PhysDeriv(MultiRegions::eY, streak->GetPhys(), derstreak);
 
    // set intiial xc to be equispaced over mesh and yc to be zero
    NekDouble x_max = Vmath::Vmax(nq,x,1);
    NekDouble x_min = Vmath::Vmin(nq,x,1);
 
    for(i = 0; i < npts; ++i)
    {
        xc[i]  = x_min + (x_max - x_min)*i/((NekDouble)(npts-1));
        yc[i] = 0.0;
    }
 
 
    int elmtid, offset,cnt;
    NekDouble U,dU;
    NekDouble F;
    NekDouble ConvTol  = 1e-9;
    NekDouble CoordTol = 1e-5;
    int maxiter = 100;
    Array<OneD, NekDouble> coord(2);
    NekDouble ytmp;
    // Do Newton iteration on y direction
    cerr << "[";
    for(int e=0; e<npts; e++)
    {
        coord[0] = xc[e];
        coord[1] = yc[e];
cout<<e<<endl;
        if(!(e%10))
        {
            cerr << ".";
        }
 
        F = 1000;
        cnt = 0;
              int its=0;
                  int  attempt=0;
//cout<<"start guess:  x="<<xc[e]<<"    y="<<yc[e]<<endl;
           while( abs(F)> 0.000000001)
           {
                    ytmp = coord[1];
                        elmtid = streak->GetExpIndex(coord,0.00001);
                    offset = streak->GetPhys_Offset(elmtid);
            U = streak->GetExp(elmtid)->PhysEvaluate(coord, streak->GetPhys() + offset);
            dU  = streak->GetExp(elmtid)->PhysEvaluate(coord, derstreak + offset);
            coord[1] = coord[1] - (U-cr)/dU;
            F = U-cr;
            ASSERTL0( coord[0]==xc[e], " x coordinate must remain the same");
                        //stvalues[e] = streak->GetExp(elmtid)->PhysEvaluate(coord, streak->GetPhys() +offset );
//cout<<"elmtid="<<elmtid<<"  x="<<coord[0]<<"   y="<<coord[1]<<"    stvalue="<<U<<"   dU="<<dU<<endl;
                        if(abs(coord[1])>1 )
                        {
                             coord[1] = ytmp +0.01;
                             elmtid = streak->GetExpIndex(coord,0.00001);
                             offset = streak->GetPhys_Offset(elmtid);
                 NekDouble Utmp = streak->GetExp(elmtid)->PhysEvaluate(coord, streak->GetPhys() + offset);
                             NekDouble dUtmp = streak->GetExp(elmtid)->PhysEvaluate(coord, derstreak + offset);
                 coord[1] = coord[1] - (Utmp-cr)/dUtmp;
 
                             if( (abs(Utmp-cr)>abs(F))||(abs(coord[1])>1)  )
                             {
                                  coord[1] = ytmp -0.01;
                             }
 
                             attempt++;
                        }
                        else
                        {
                             ASSERTL0(abs(coord[1])<= 1, " y value out of bound +/-1");
                        }
 
                        its++;
                        if(its>1000 && abs(F)< 0.0001)
                        {
                            cout<<"warning streak position obtained with precision:"<<F<<endl;
                            break;
                        }
                        else if(its>1000)
                        {
                               ASSERTL0(false, "no convergence after 1000 iterations");
                        }
                  }
 
        yc[e] = coord[1];
    }
    cerr << "]" << endl;
 
    // output to interface file
    FILE *fp = fopen("interfacedat.geo","w");
 
    NekDouble y_max = Vmath::Vmax(nq,y,1);
    NekDouble y_min = Vmath::Vmin(nq,y,1);
 
    cnt = 1;
    fprintf(fp,"Point(%d)={%12.10lf,%12.10lf,0,1.0}; \n",
            cnt++,x_min,y_min);
    fprintf(fp,"Point(%d)={%12.10lf,%12.10lf,0,1.0}; \n",
            cnt++,x_max,y_min);
    fprintf(fp,"Point(%d)={%12.10lf,%12.10lf,0,1.0}; \n",
            cnt++,x_max,y_max);
    fprintf(fp,"Point(%d)={%12.10lf,%12.10lf,0,1.0}; \n",
            cnt++,x_min,y_max);
 
    for(i = 0; i < npts; ++i)
    {
        fprintf(fp,"Point(%d)={%12.10lf,%12.10lf,0,1.0};  \n",
                cnt++,xc[i],yc[i]);
    }
 
    fclose(fp);
 
    // output to interface_up file as bend of vertical shift and 45 degrees shift
    fp = fopen("interfacedat_up.geo","w");
 
 
    NekDouble nx,ny,norm;
 
    fprintf(fp,"Point(%d)={%12.10lf,%12.10lf,0,1.0};  \n",cnt++,xc[0],yc[0]+trans);
 
    for(i = 1; i < npts-1; ++i)
    {
        norm = sqrt((xc[i+1]-xc[i-1])*(xc[i+1]-xc[i-1])+(yc[i+1]-yc[i-1])*(yc[i+1]-yc[i-1]));
        nx = (yc[i-1]-yc[i+1])/norm;
        ny = (xc[i+1]-xc[i-1])/norm;
 
        fprintf(fp,"Point(%d)={%12.10lf,%12.10lf,0,1.0};  \n",
                cnt++,xc[i]+nx*trans,yc[i]+ny*trans);
    }
 
    fprintf(fp,"Point(%d)={%12.10lf,%12.10lf,0,1.0};  \n",cnt++,xc[npts-1],yc[npts-1]+trans);
 
 
    // output to interface_up file as bend of vertical shift and 45 degrees shift
    fp = fopen("interfacedat_dn.geo","w");
 
    trans = -trans;
 
    fprintf(fp,"Point(%d)={%12.10lf,%12.10lf,0,1.0};  \n",cnt++,xc[0],yc[0]+trans);
 
    for(i = 1; i < npts-1; ++i)
    {
        norm = sqrt((xc[i+1]-xc[i-1])*(xc[i+1]-xc[i-1])+(yc[i+1]-yc[i-1])*(yc[i+1]-yc[i-1]));
        nx = (yc[i-1]-yc[i+1])/norm;
        ny = (xc[i+1]-xc[i-1])/norm;
 
        fprintf(fp,"Point(%d)={%12.10lf,%12.10lf,0,1.0};  \n",
                cnt++,xc[i]+nx*trans,yc[i]+ny*trans);
    }
 
    fprintf(fp,"Point(%d)={%12.10lf,%12.10lf,0,1.0};  \n",cnt++,xc[npts-1],yc[npts-1]+trans);
 
}