FldAddFalknerSkanBL.cpp

Go to the documentation of this file.

/* ==========================================================================
 * Generation of a .fld file for the Falkner-Skan boundary layer starting
 * from a session file with some physical data for the definition of the
 * BL and a .txt file with the similarity solution.
 * ======================================================================== */

/* =====================================
 * Author: Gianmarco Mengaldo
 * Generation: dd/mm/aa = 08/03/12
 * Mantainer: Gianmarco Mengaldo
===================================== */

//! Loading cc libraries
#include <cstdio>
#include <cstdlib>
#include <iostream>
#include <iomanip>

//! Loading Nektar++ libraries
#include <LibUtilities/Memory/NekMemoryManager.hpp>
#include <MultiRegions/ExpList.h>
#include <MultiRegions/ExpList2D.h>
#include <MultiRegions/ContField2D.h>
#include <SpatialDomains/MeshGraph2D.h>


//! Nektar++ namespace
using namespace Nektar;

//! Main
int main(int argc, char *argv[])
{
    //! Setting up the decimal precision to machine precision
    setprecision (16);

    //! Auxiliary counters for the x and y directions
    int  i, j, numModes, nFields;

    //! Usage check
    if((argc != 2) && (argc != 3))
    {
        fprintf(stderr,"Usage: ./FldAddFalknerSkanBL sessionFile [SysSolnType]\n");exit(1);
    }

    //! Reading the session file
    LibUtilities::SessionReaderSharedPtr vSession = LibUtilities::SessionReader::CreateInstance(argc, argv);

    //! Loading the parameters to define the BL
    NekDouble Re;
    NekDouble L;
    NekDouble U_inf;
    NekDouble x;
    NekDouble x_0;
    NekDouble nu;
    string    BL_type;
    string    txt_file;
    string    stability_solver;
    int       numLines;


    BL_type          = vSession->GetSolverInfo("BL_type");
    txt_file         = vSession->GetSolverInfo("txt_file");
    stability_solver = vSession->GetSolverInfo("stability_solver");

    if(stability_solver != "velocity_correction_scheme" &&
       stability_solver != "coupled_scheme")
    {
        fprintf(stderr,"Error: You must specify the stability solver in the session file properly.\n");
        fprintf(stderr,"Options: 'velocity_correction_scheme' [output ===> (u,v,p)]; 'coupled_scheme' [output ===>(u,v)]\n");
        exit(1);
    }

    vSession->LoadParameter("Re",               Re,             1.0);
    vSession->LoadParameter("L",                L,              1.0);
    vSession->LoadParameter("U_inf",            U_inf,          1.0);
    vSession->LoadParameter("x",                x,              1.0);
    vSession->LoadParameter("x_0",              x_0,            1.0);
    vSession->LoadParameter("NumberLines_txt",  numLines,       1.0);

    //! Check on the physical parameters
    if(x <= 0)
    {
        fprintf(stderr,"Error: x must be positive ===> CHECK the session file\n");
        exit(1);
    }

    if(x_0 < 0)
    {
        fprintf(stderr,"Error: x_0 must be positive or at least equal to 0 ===> CHECK the session file\n");
        exit(1);
    }
    std::cout<<"\n=========================================================================\n";
    std::cout<<"Falkner-Skan Boundary Layer Generation (version of July 12th 2012)\n";
    std::cout<<"=========================================================================\n";
    std::cout<<"*************************************************************************\n";
    std::cout<<"DATA FROM THE SESSION FILE:\n";
    std::cout << "Reynolds number                          = " << Re               << "\t[-]"   << std::endl;
    std::cout << "Characteristic length                    = " << L                << "\t\t[m]" << std::endl;
    std::cout << "U_infinity                               = " << U_inf            << "\t[m/s]" << std::endl;
    std::cout << "Position x (parallel case only)          = " << x                << "\t\t[m]" << std::endl;
    std::cout << "Position x_0 to start the BL [m]         = " << x_0              << "\t\t[m]" << std::endl;
    std::cout << "Number of lines of the .txt file         = " << numLines         << "\t[-]"   << std::endl;
    std::cout << "BL type                                  = " << BL_type          << std::endl;
    std::cout << ".txt file read                           = " << txt_file         << std::endl;
    std::cout << "Stability solver                         = " << stability_solver << std::endl;
    std::cout<<"*************************************************************************\n";
    std::cout<<"-------------------------------------------------------------------------\n";
    std::cout<<"MESH and EXPANSION DATA:\n";

    //! Computation of the kinematic viscosity
    nu = U_inf * L / Re;

    //! Read in mesh from input file and create an object of class MeshGraph2D
    SpatialDomains::MeshGraphSharedPtr graphShPt;
    graphShPt = MemoryManager<SpatialDomains::MeshGraph2D>::AllocateSharedPtr(vSession);

    //!  Feed our spatial discretisation object
    MultiRegions::ContField2DSharedPtr Domain;
    Domain = MemoryManager<MultiRegions::ContField2D>::AllocateSharedPtr(vSession,graphShPt,vSession->GetVariable(0));

    //! Get the total number of elements
    int nElements;
    nElements = Domain->GetExpSize();
    std::cout << "Number of elements                 = " << nElements << std::endl;

    //! Get the total number of quadrature points (depends on n. modes)
    int nQuadraturePts;
    nQuadraturePts = Domain->GetTotPoints();
    std::cout << "Number of quadrature points        = " << nQuadraturePts << std::endl;

    //! Coordinates of the quadrature points
    Array<OneD,NekDouble> x_QuadraturePts;
    Array<OneD,NekDouble> y_QuadraturePts;
    Array<OneD,NekDouble> z_QuadraturePts;
    x_QuadraturePts = Array<OneD,NekDouble>(nQuadraturePts);
    y_QuadraturePts = Array<OneD,NekDouble>(nQuadraturePts);
    z_QuadraturePts = Array<OneD,NekDouble>(nQuadraturePts);
    Domain->GetCoords(x_QuadraturePts,y_QuadraturePts,z_QuadraturePts);

    //! Reading the .txt file with eta, f(eta) and f'(eta) -----------------------------------------
    const char *txt_file_char;
    //string txt_file(argv[argc-1]);
    txt_file_char = txt_file.c_str();

    //! Open the .txt file with the BL data
    ifstream pFile(txt_file_char);
    if (!pFile)
    {
        cout << "Errro: Unable to open the .txt file with the BL data\n";
        exit(1);
    }

    numLines = numLines/3;
    NekDouble d;
    std::vector<std::vector<NekDouble> > GlobalArray (3);

    for (j=0; j<=2; j++)
    {
        GlobalArray[j].resize(numLines);
        for (i=0; i<=numLines-1; i++)
        {
            pFile >> d;
            GlobalArray[j][i] = d;
        }
    }
    //! --------------------------------------------------------------------------------------------


    //! Saving eta, f(eta) and f'(eta) into separate arrays ----------------------------------------
    Array<OneD,NekDouble> eta;
    Array<OneD,NekDouble> f;
    Array<OneD,NekDouble> df;

    eta = Array<OneD,NekDouble>(numLines);
    f   = Array<OneD,NekDouble>(numLines);
    df  = Array<OneD,NekDouble>(numLines);

    for (i=0; i<numLines; i++)
    {
        eta[i] = GlobalArray[0][i];
        f[i]   = GlobalArray[1][i];
        df[i]  = GlobalArray[2][i];
    }
    //! --------------------------------------------------------------------------------------------


    //! Inizialisation of the arrays for computations on the Quadrature points ---------------------
    Array<OneD,NekDouble> eta_QuadraturePts;
    eta_QuadraturePts = Array<OneD,NekDouble>(nQuadraturePts);

    Array<OneD,NekDouble> f_QuadraturePts;
    f_QuadraturePts   = Array<OneD,NekDouble>(nQuadraturePts);

    Array<OneD,NekDouble> df_QuadraturePts;
    df_QuadraturePts  = Array<OneD,NekDouble>(nQuadraturePts);

    Array<OneD,NekDouble> u_QuadraturePts;
    u_QuadraturePts   = Array<OneD,NekDouble>(nQuadraturePts);

    Array<OneD,NekDouble> v_QuadraturePts;
    v_QuadraturePts   = Array<OneD,NekDouble>(nQuadraturePts);

    Array<OneD,NekDouble> p_QuadraturePts;
    p_QuadraturePts   = Array<OneD,NekDouble>(nQuadraturePts);
    //! --------------------------------------------------------------------------------------------



    //! PARALLEL CASE ------------------------------------------------------------------------------
    if(BL_type == "Parallel")
    {
        for(i=0; i<nQuadraturePts; i++)
        {
            eta_QuadraturePts[i] = y_QuadraturePts[i] * sqrt(U_inf / (2 * x * nu));
            for(j=0; j<numLines-1; j++)
            {
                if(eta_QuadraturePts[i] >= eta[j] && eta_QuadraturePts[i] <= eta[j+1])
                {
                    f_QuadraturePts[i]  = (eta_QuadraturePts[i] - eta[j]) * (f[j+1] - f[j]) / (eta[j+1] - eta[j]) + f[j];
                    df_QuadraturePts[i] = (eta_QuadraturePts[i] - eta[j]) * (df[j+1] - df[j]) / (eta[j+1] - eta[j]) + df[j];
                }

                else if(eta_QuadraturePts[i] == 1000000)
                {
                    f_QuadraturePts[i] = f[numLines-1];
                    df_QuadraturePts[i] = df[numLines-1];
                }

                else if(eta_QuadraturePts[i] > eta[numLines-1])
                {
                    f_QuadraturePts[i] = f[numLines-1] + df[numLines-1] * (eta_QuadraturePts[i] - eta[numLines-1]);
                    df_QuadraturePts[i] = df[numLines-1];
                }

            }

            u_QuadraturePts[i] = U_inf * df_QuadraturePts[i];
            v_QuadraturePts[i] = nu * sqrt(U_inf / (2.0 * nu * x)) * (y_QuadraturePts[i] * sqrt(U_inf / (2.0 * nu * x)) * df_QuadraturePts[i] - f_QuadraturePts[i]);
            p_QuadraturePts[i] = 0.0;
        }
    }
    //! --------------------------------------------------------------------------------------------



    //! NON-PARALLEL CASE --------------------------------------------------------------------------
    if(BL_type == "nonParallel")
    {
        for(i=0; i<nQuadraturePts; i++)
        {
            eta_QuadraturePts[i] = y_QuadraturePts[i] * sqrt(U_inf / (2 * (x_QuadraturePts[i] + x_0) * nu));

            if((x_QuadraturePts[i] + x_0) == 0)
            {
                eta_QuadraturePts[i] = 1000000;
            }

            for(j=0; j<numLines-1; j++)
            {
                if(eta_QuadraturePts[i] >= eta[j] && eta_QuadraturePts[i] <= eta[j+1])
                {
                    f_QuadraturePts[i]  = (eta_QuadraturePts[i] - eta[j]) * (f[j+1] - f[j]) / (eta[j+1] - eta[j]) + f[j];
                    df_QuadraturePts[i] = (eta_QuadraturePts[i] - eta[j]) * (df[j+1] - df[j]) / (eta[j+1] - eta[j]) + df[j];
                }

                else if(eta_QuadraturePts[i] == 1000000)
                {
                    f_QuadraturePts[i] = f[numLines-1];
                    df_QuadraturePts[i] = df[numLines-1];
                }

                else if(eta_QuadraturePts[i] > eta[numLines-1])
                {
                    f_QuadraturePts[i] = f[numLines-1] + df[numLines-1] * (eta_QuadraturePts[i] - eta[numLines-1]);
                    df_QuadraturePts[i] = df[numLines-1];
                }
            }

            u_QuadraturePts[i] = U_inf * df_QuadraturePts[i];
            v_QuadraturePts[i] = nu * sqrt(U_inf / (2.0 * nu * (x_QuadraturePts[i] + x_0))) *
                                 (y_QuadraturePts[i] * sqrt(U_inf / (2.0 * nu * (x_QuadraturePts[i] + x_0))) *
                                 df_QuadraturePts[i] - f_QuadraturePts[i]);

            //! INFLOW SECTION: X = 0; Y > 0.
            if((x_QuadraturePts[i] + x_0) == 0)
            {
                u_QuadraturePts[i] = U_inf;
                v_QuadraturePts[i] = 0.0;
            }

            //! SINGULARITY POINT: X = 0; Y = 0.
            if((x_QuadraturePts[i] + x_0) == 0 && y_QuadraturePts[i] == 0)
            {
                u_QuadraturePts[i] = 0.0;
                v_QuadraturePts[i] = 0.0;
            }

            p_QuadraturePts[i] = 0.0;
        }
    }
    //! --------------------------------------------------------------------------------------------



    //! Inspection of the interpolation ------------------------------------------------------------
    FILE *etaOriginal;
    etaOriginal = fopen("eta.txt","w+");
    for(i=0; i<numLines; i++)
    {
        fprintf(etaOriginal,"%f %f %f \n", eta[i], f[i], df[i]);
    }
    fclose(etaOriginal);


    FILE *yQ;
    yQ = fopen("yQ.txt","w+");
    for(i=0; i<nQuadraturePts; i++)
    {
        fprintf(yQ,"%f %f %f %f %f %f %f\n", x_QuadraturePts[i], y_QuadraturePts[i], u_QuadraturePts[i],
                v_QuadraturePts[i], eta_QuadraturePts[i], f_QuadraturePts[i], df_QuadraturePts[i]);
    }
    fclose(yQ);
    //! --------------------------------------------------------------------------------------------



    //! Definition of the 2D expansion using the mesh data specified on the session file -----------
    MultiRegions::ExpList2DSharedPtr Exp2D_uk;
    Exp2D_uk = MemoryManager<MultiRegions::ExpList2D>::AllocateSharedPtr(vSession,graphShPt);

    MultiRegions::ExpList2DSharedPtr Exp2D_vk;
    Exp2D_vk = MemoryManager<MultiRegions::ExpList2D>::AllocateSharedPtr(vSession,graphShPt);

    MultiRegions::ExpList2DSharedPtr Exp2D_pk;
    Exp2D_pk = MemoryManager<MultiRegions::ExpList2D>::AllocateSharedPtr(vSession,graphShPt);
    //! --------------------------------------------------------------------------------------------



    //! Filling the 2D expansion using a recursive algorithm based on the mesh ordering ------------
    LibUtilities::BasisSharedPtr Basis;
    Basis       = Domain->GetExp(0)->GetBasis(0);
    numModes    = Basis->GetNumModes();

    std::cout<< "Number of modes                    = " << numModes << std::endl;

    //! Copying the ukGlobal vector (with the same pattern of m_phys) in m_phys
    Vmath::Vcopy(nQuadraturePts, u_QuadraturePts , 1, Exp2D_uk->UpdatePhys(), 1);
    Vmath::Vcopy(nQuadraturePts, v_QuadraturePts,  1, Exp2D_vk->UpdatePhys(), 1);
    Vmath::Vcopy(nQuadraturePts, p_QuadraturePts , 1, Exp2D_pk->UpdatePhys(), 1);

    //! Initialisation of the ExpList Exp
    Array<OneD, MultiRegions::ExpListSharedPtr> Exp(3);
    Exp[0] = Exp2D_uk;
    Exp[1] = Exp2D_vk;

    if(stability_solver == "velocity_correction_scheme")
        Exp[2] = Exp2D_pk;

    //! Expansion coefficient extraction (necessary to write the .fld file)
    Exp[0]->FwdTrans(Exp2D_uk->GetPhys(),Exp[0]->UpdateCoeffs());
    Exp[1]->FwdTrans(Exp2D_vk->GetPhys(),Exp[1]->UpdateCoeffs());

    if(stability_solver == "velocity_correction_scheme")
        Exp[2]->FwdTrans(Exp2D_pk->GetPhys(),Exp[2]->UpdateCoeffs());
    //! --------------------------------------------------------------------------------------------



    //! Generation .FLD file with one field only (at the moment) -----------------------------------
    //! Definition of the name of the .fld file
    string FalknerSkan = "FalknerSkan.fld";

    //! Definition of the number of the fields
    if(stability_solver == "coupled_scheme")
        nFields = 2;

    if(stability_solver == "velocity_correction_scheme")
        nFields = 3;


    //! Definition of the Field
    std::vector<LibUtilities::FieldDefinitionsSharedPtr> FieldDef = Exp[0]->GetFieldDefinitions();
    std::vector<std::vector<NekDouble> > FieldData(FieldDef.size());

    for(j = 0; j < nFields; ++j)
    {
        for(i = 0; i < FieldDef.size(); ++i)
        {
            if(j == 0)
            {
                FieldDef[i]->m_fields.push_back("u");
            }
            else if(j == 1)
            {
                FieldDef[i]->m_fields.push_back("v");
            }
            else if(j == 2 && stability_solver == "velocity_correction_scheme")
            {
                FieldDef[i]->m_fields.push_back("p");
            }
            Exp[j]->AppendFieldData(FieldDef[i], FieldData[i]);
        }
    }

    LibUtilities::Write(FalknerSkan, FieldDef, FieldData);

    std::cout<<"-------------------------------------------------------------------\n";
    //! ----------------------------------------------------------------------------

    return 0;
}